Eshop roka 2025 s vykurovacou technikou

Кришка для арматури типу EK; нікель IVAR.AC 4601 N

Код: 550090
Не оцінено Детальна інформація про рейтинг
₴0 / шт. ₴0 без ПДВ Виміряти ціну:
в наявності (3 шт.)

Детальна інформація

Детальний опис продукту

Заглушка арматури типу EK, IVAR.AC 4601 N, упаковка: 100 в пакеті / 800 в коробці

 

 

Увага: Лише до колекторів IVAR.

Часті питання

  • Як обрати правильний розмір фітингу? Розмір різьби має точно відповідати різьбі на трубі або арматурі, до якої приєднується фітинг – абревіатури FF (внутрішній-внутрішній) та MF (зовнішній-внутрішній) в назві вказують тип різьби на кожній стороні.
  • Чи потрібен ущільнювальний матеріал при монтажі? Так, на різьбові з'єднання стандартно використовується тефлонова стрічка або конопляне волокно з ущільнювальною пастою, щоб забезпечити ідеальну герметичність з'єднання.
  • Чи має монтаж виконати фахівець? Просте різьбове з'єднання може виконати і домашній майстер за наявності базових навичок, при втручанні в вже функціонуючий розподіл (особливо газового) рекомендуємо запросити інсталятора, який також перевірить герметичність з'єднання.

Додаткові параметри

Категорія: Затички для арматури типу EK
Гарантія: 2 роки
Вага: 0.038 kg
Тип фітинга: заглушка / ковпачок
Тип з'єднання: євроконус (EK)
Наявність: В наявності або в постачальника
Posledná aktuálizacia ceny: 13.04.2026 1:11:01

Рейтинг продукту

Будьте першим, хто опублікує статтю в цьому пункті!

Не заповнюйте це поле

Як би ви оцінили цей продукт? Виберіть від 1 до 5 зірок, де 1 - найгірша оцінка, а 5 - найкраща.

Обговорення

Не заповнюйте це поле

Список дискусій

N Аватар автора 08.10.2026 09:05
Good morning, does this nickel cap fit my existing IVAR manifold with Eurocone outlets?
A Аватар автора 08.10.2026 09:05
Yes, it is designed specifically as a plug for Eurocone (EK) outlets on IVAR manifolds. Just ensure the thread size matches exactly and use PTFE tape or hemp fibre with sealing paste to guarantee a tight joint. It is made of nickel-plated brass CW617N and works up to 120 °C.
M Аватар автора 14.01.2022 15:36
Dobrý deň, potrebujem kúpiť Zátky R5/4" DIN 2999, akosť 14301 a zátky M 18x1,5, DIN 2999, akosť 1.4301.
A Аватар автора 14.01.2022 15:36
Dobrý deň, uvedené zátky v ponuke nemáme.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.