Eshop roka 2025 s vykurovacou technikou

Сітка для всмоктувального кошика - для BRA.F5.000 - DN 150; L=200мм BRA.50.000

Код: 50000150
Не оцінено Детальна інформація про рейтинг
₴14 234,23 –20 %
Vykurovacia technika Sítko pre sací kôš - na BRA.F5.000 - DN 150; L=200mm
₴14 234,23 –20 % ₴11 387,28 / шт. ₴9 257,95 без ПДВ Виміряти ціну:
в наявності у постачальника

Детальна інформація

Детальний опис продукту

Сітка для всмоктувального кошика - до зворотного клапана BRA.F5.000, BRA.50.000, розмір: DN 150, довжина: 200 mm

 

  • для монтажу на фланці PN 16 згідно з ČSN EN 1092
  • матеріал: оцинкована сталь (під замовлення нержавіюча AISI 316 - тип BRA.53.000)
  • розмір отворів 5 mm

Часті питання

  • Як обрати правильний тип та розмір арматури/вентиля? Керуйтеся номінальним тиском (PN) та робочою температурою (T), зазначеними в технічних параметрах – вони повинні відповідати або перевищувати фактичні умови експлуатації вашої системи, а розмір приєднання повинен відповідати діаметру труби.
  • Як працює ця арматура/вентиль? Точний принцип дії (закриття, регулювання тиску, зворотний хід тощо) залежить від конкретного типу – докладний опис функції ви знайдете вище біля цього продукту.
  • Чи монтаж повинен виконувати фахівець? При простіших запірних арматурах монтаж може виконати і домашній майстер, при регулюючих та безпекових арматурах (запобіжні клапани, редукційні вентилі) рекомендуємо завжди фахівця, оскільки йдеться про елементи з безпековою функцією.

Додаткові параметри

Категорія: BRA.50.000 - фланцеві сітки до зворотного клапана F5
Гарантія: 2 роки
Вага: 2.097 kg
Номінальний діаметр (DN): DN 150
Тип арматури: фільтр / сітчастий фільтр
Наявність: В наявності або в постачальника
Останнє оновлення ціни: 13.04.2026 1:09:07

Рейтинг продукту

Будьте першим, хто опублікує статтю в цьому пункті!

Не заповнюйте це поле

Як би ви оцінили цей продукт? Виберіть від 1 до 5 зірок, де 1 - найгірша оцінка, а 5 - найкраща.

Обговорення

Не заповнюйте це поле

Список дискусій

S Аватар автора 28.10.2026 08:17
I require confirmation regarding the material composition of this strainer intended for DN 150 flanges, specifically whether the standard galvanized steel construction is sufficient for my system or if a stainless steel AISI 316 variant must be ordered.
A Аватар автора 28.10.2026 08:17
The standard model you selected is indeed made of galvanized steel, which fits your PN 16 flange requirements perfectly. If you need the corrosion-resistant version in stainless steel AISI 316, you should look for the type BRA.53.000 instead. Both options share the same 200 mm length and 5 mm hole size specifications.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.