Eshop roka 2025 s vykurovacou technikou

Фланцевий фільтр з магнітом - серія 11.000 M - DN 65; L=290мм BRA.11.000 M

Код: 11000065M
Не оцінено Детальна інформація про рейтинг
₴14 124,10 –20 %
Vykurovacia technika Prírubový filter s magnetom - séria 11.000 M - DN 65; L=290mm
₴14 124,10 –20 % ₴11 299,28 / шт. ₴9 186,41 без ПДВ Виміряти ціну:
в наявності у постачальника

Детальна інформація

Детальний опис продукту

Фланцевий фільтр - з магнітом, BRA.11.000 M, розмір: DN 65, довжина: 290 mm

 

  • макс. тиск 16 бар
  • монтаж між фланцями PN16 згідно з STN EN 1092-1
  • T = -10 °C до макс. +100 °C
  • для опалення та кондиціонерів (HVAC), розподілу води, насосних станцій
  • матеріал - корпус, кришка: чавун GJL 250, сітка: AISI 304, ущільнювач: EPDM
  • пористість відповідно до розміру від 0,8 до 1,6 мм
  • з відкалювальним гвинтом
  • застосування для води з вмістом до 50 % гліколів
  • не підходить для пари, газів та рідин, що містять олії або вуглеводні

Часті питання

  • Як обрати правильний тип та розмір арматури/вентиля? Керуйтеся номінальним тиском (PN) та робочою температурою (T), зазначеними в технічних параметрах - вони повинні відповідати або перевищувати фактичні умови експлуатації вашої системи, а розмір приєднання повинен відповідати діаметру труби.
  • Як працює ця арматура/вентиль? Точний принцип дії (закриття, регулювання тиску, зворотний хід тощо) залежить від конкретного типу - докладний опис функції ви знайдете вище біля цього продукту.
  • Чи повинен монтаж виконувати фахівець? При простіших запірних арматурах монтаж може виконати і домашній майстер, при регулювальних та безпекових арматурах (запобіжні клапани, редукційні вентилі) рекомендуємо завжди фахівця, оскільки йдеться про елементи з безпековою функцією.

Додаткові параметри

Категорія: Фланцеві фільтри BRA.11.000,FV,M
Гарантія: 2 роки
Вага: 12.356 kg
Номінальний діаметр (DN): DN 65
Тип арматури: фільтр / сітчастий фільтр
Матеріал корпусу: чавун
Наявність: В наявності або в постачальника
Останнє оновлення ціни: 13.04.2026 1:03:28

Рейтинг продукту

Будьте першим, хто опублікує статтю в цьому пункті!

Не заповнюйте це поле

Як би ви оцінили цей продукт? Виберіть від 1 до 5 зірок, де 1 - найгірша оцінка, а 5 - найкраща.

Обговорення

Не заповнюйте це поле

Список дискусій

J Аватар автора 21.10.2026 12:15
Ich hab im Keller eine neue Heizung und brauche so ein Teil, das den Dreck aus dem Wasser fängt. Passt das hier auch für Wasser mit Glykol oder nur für ganz normales Wasser? Und wie groß muss mein Rohr sein, damit das passt?
A Аватар автора 21.10.2026 12:15
Für Wasser mit bis zu 50 Prozent Glykol ist dieser Filter genau richtig gemacht. Damit er passt, müssen Sie auf Ihren Rohrdurchmesser achten, der hier DN 65 sein muss. Die Montage zwischen den Flanschen klappt dann gut, wenn Ihre Anlage nicht höher als 16 bar Druck hat.
G Аватар автора 20.08.2026 09:37
Good morning, I have some old pipes in my basement and I want to put a kind of filter on them so the heating works better, but I honestly have no idea what I'm doing. This filter with a magnet - does it just screw on somehow, or do I need special flanges or something like that to attach it to the pipe?
A Аватар автора 20.08.2026 09:37
Good morning! This filter uses flanges to connect to the pipe, so it's not a simple screw-on type - you'll need matching DN 65 flanges on your pipe to attach it properly. It's worth having a plumber take a look if you're not sure what connections you have, since the pipe size really needs to match. The magnet inside is a nice bonus as it catches metal particles and keeps your heating system cleaner over time.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.