Eshop roka 2025 s vykurovacou technikou

Приєднувальний штуцер - для плоского ущільнювача - C - G 6/4"-35мм IVAR.IVC60

Код: IVC60.3516
Не оцінено Детальна інформація про рейтинг
₴1 406,42 –19 %
Vykurovacia technika Pripojovacie šróbenie - na ploché tesnenie - C - G 6/4"-35mm
₴1 406,42 –19 % ₴1 125,33 / шт. ₴914,90 без ПДВ Виміряти ціну:
в наявності (3 шт.)

Детальна інформація

Детальний опис продукту

Приєднувальне шробування - на плоске ущільнення, IVAR.IVC60, розмір: G 6/4" - 35 mm, пакування: 8 шт

 

  • PN 16, T = -20 °C до +85 °C - макс. +120 °C
  • приєднувальне шробування на плоске ущільнення PRESS x ПРОВЛЕЧНА ГАЙКА
  • сфера застосування: для опалювальних систем, спринклерних систем тривалого зрошення,
    тиском повітря, інертних газів та промисловості
  • матеріал: вуглецева оцинкована сталь, латунь, O-кільце - EPDM

 

Примітка: 
Не містить речовин, які обмежують поверхневе покриття, негерметичне, якщо не злісне та з індикатором обтиснення до розміру 54 mm.

Часті питання

  • Для чого призначено цю трубу? Точне визначення (розводи води, опалення, газу, сонячних систем, стисненого повітря тощо) ви знайдете в описі та технічних параметрах цього продукту - різні матеріали (нержавіюча сталь, вуглецева сталь) мають різну стійкість до корозії та різні середовища, для яких вони сертифіковані.
  • Як з'єднується ця труба? Зазвичай пресовими (press) або зварними з'єднаннями, залежно від конкретної системи та діаметру - звертайте увагу на використання сумісних фітингів тієї ж системи.
  • Чи має монтаж виконувати фахівець? Так, особливо при розводах газу, тиском повітря або при зварних з'єднаннях монтаж залишається за особою з відповідною професійною кваліфікацією.

Додаткові параметри

Категорія: IVAR.IVC60 - фітинги для підключення
Гарантія: 2 роки
Вага: 0.252 kg
Наявність: В наявності або в постачальника
Останнє оновлення ціни: 13.04.2026 1:09:53

Рейтинг продукту

Будьте першим, хто опублікує статтю в цьому пункті!

Не заповнюйте це поле

Як би ви оцінили цей продукт? Виберіть від 1 до 5 зірок, де 1 - найгірша оцінка, а 5 - найкраща.

Обговорення

Не заповнюйте це поле

Список дискусій

E Аватар автора 08.10.2026 22:12
I need to know if this G 6/4" union can be used for a pressurised dry air system and what the maximum temperature limit is.
A Аватар автора 08.10.2026 22:12
Yes, this connecting union is suitable for pressurised dry air as well as heating systems. The flat gasket allows it to work within a temperature range of -20 °C to +85 °C, with a short-term max of +120 °C. Just remember that it must be pressed to seal properly and includes a press indicator up to size 54 mm.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.